Specific model information – Teledyne 3010TB - Split architecture trace oxygen analyzer User Manual
Page 4
iv
Model 3010TB
Teledyne Analytical Instruments
Specific Model Information
The instrument for which this manual was supplied may incorporate
one or more options not supplied in the standard instrument. Commonly
available options are listed below, with check boxes. Any that are incorpo-
rated in the instrument for which this manual was supplied are indicated by a
check mark in the box.
Instrument Serial Number: __________________________
The instrument with the above serial number has the following
Options:
o
3010TB-C
Three gas inputs, for sample, zero and span gases, with
three solenoid-actuated gas-flow control valves built in.
Valves are automatically synchronized to the analyzer's
electronic control sequences.
o
3010TB–F
Built-in flame arresters for Groups C and D service.
o
3010TB–G
Built-in flame arresters for Groups C and D service, plus
gas-control valves as in –C option, above.
o
3010TB–H
Built-in flame arresters for Group B (hydrogen) service.
o
3010TB–I
Built-in flame arresters for Group B (hydrogen) service,
plus gas-control valves as in –C option, above.
o
Cell Class*
____________________
(L-2C standard).
Enter Class Designation
*
See Part II, Chapter 2 and/or any addendum that may be
attached to this manual for cell specifications.