AMX G3 - Manual (Page 31)

Color Active-Matrix LCD Touch Panels Designing a Touch Panel Page 23
Designing a Touch Panel Page
Overview
Use the step-by-step instructions to create Touch Panel pages, buttons, joysticks,
bargraphs, and set page color attributes. For in-depth information on all the
operations available on the Touch Panel, read through the Touch Panel Program
Reference section to learn about all the operations and techniques available to
design Touch Panel pages.
Activating the Edit Button
Before you design a Touch Panel page you must activate the EDIT button which
contains options to add and configure Touch Panels and buttons. When you
power up the Touch Panel, the first page you see is the MAIN page shown in
Figure 27. Refer to Edit button and Go to information in the Touch Panel Program
Reference section if the MAIN page does not appear.
Note
If you have a pre-
programmed panel, you may
not see the MAIN page.
Figure 27
MAIN page