Wireless settings (optional smt-pk) – AMX G3 User Manual
Page 74
66
Touch Panel Program Reference
Color Active-Matrix LCD Touch Panels
•
Network Eff. XXX%
Shows the communication efficiency of bi-directional
RF transmissions between the Touch Panel and AXR-WAVES. The efficiency
percentage (0–100%) is determined by the number of retries required to
complete a panel operation.
Wireless settings (optional SMT-PK)
The WIRELESS SETTINGS button appears on the SETUP page when a SMT-PK
SmartPack is connected to the Min-Touch. Press the WIRELESS SETTINGS button
to open the optional page shown in Figure 104.
Refer to the SmartPacks for TiltScreen Touch Panels instruction manual for detailed
information.
•
SLEEP TIMEOUT
Press the UP and DN buttons to set the sleep time. The
minimum sleep time is 0 (off) and maximum is 120 minutes. When the panel
goes to sleep, all communication and battery discharge stops. If the sleep
time is set to 5, the panel goes into sleep mode if there is no activity for 5
minutes. The panel wakes up when you touch the screen for more than .5
seconds.
•
Smart-Pk Module Not Locked/Locked
Appears when an optional
SMT-PK is connected to the panel. Not locked indicates the panel is not
Figure 104
SMT-PK page