AMX G3 - Manual (Page 39)

Color Active-Matrix LCD Touch Panels Designing a Touch Panel Page 31
3. Press ADD to add a button to the new page. The message bar shown in Figure
41 appears. Touch and drag to add a button. The first touch point is the upper-
left corner of the button.
4. Push on the panel and drag your finger horizontally and down across the
screen to set the height and width of the button, as shown in Figure 42.
Width
Height
Touch Point
5. Release your finger from the panel to record the button dimensions into the
panel memory.
6. Press EXIT in the Edit bar.
Figure 40
BUTTON menu options
Figure 41
ADD BUTTON message bar
Figure 42
Add a button example
Note
You can add more than one
button at this time.