AMX G3 - Manual (Page 80)

72 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
Page password
Press the PAGE PASSWORD button (Figure 116) to open the keypad and assign a
numeric page password to a specific page.
If you try to open a password-protected page, the keypad appears, and you must
enter the correct password number to open the new page. The page password
range is 1 – 9,999.
• • CLEAR Clears the number in the keypad display.
• • ENTER Sets the page password number, closes the keypad, and returns to
the PROTECTED SETUP page.
Calibrate
Press CALIBRATE to open the decision button shown in Figure 117, and reset the
vertical and horizontal touch points on the LCD.
• YES Starts the calibration process. Carefully press each crosshair that
appears using your finger or dull pointer. When the calibration process is
complete, press the screen to return to the PROTECTED SETUP page.
• NO Cancels the calibration process.
Figure 115
AUTO ASSIGN button
Figure 116
PAGE PASSWORD button
Note
Press and hold for 2 seconds
to enter the Test Calibration
mode.
Figure 117
CALIBRATE decision button
Note
The crosshair for calibration
is first shown at the top-left
corner of the Touch Panel
screen.