AMX G3 - Manual (Page 88)

80 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
Edit Bar — Button Menu Options
Press EDIT and BUTTON to open the menu shown in Figure 139.
You can use the BUTTON menu to create, configure, and revise Touch Panel
button settings. The Touch Panel can however use the other BUTTON menu
features on them. The Edit bar also shows the current page name. The Edit bar also
shows the current page name. The Edit bar in Figure 139 shows MAIN PAGE is the
current page.
Add
Press ADD to add a button when the ADD BUTTON message (Figure 140) appears
on the LCD. The first touch point is the upper-left corner of the button.
Drag your finger horizontally across the screen and down to set the height and
width of the button. When the new button appears on the page, the message bar
shows you the X/Y page-position coordinates and the X/Y resolution size.
Figure 139
Edit Bar — BUTTON menu
options
Note
Buttons with Unicode Fonts
can only be created and
edited within TPDesign 3 then
imported to the Touch Panel.
Figure 140
ADD BUTTON message