AMX G3 - Manual (Page 81)

Color Active-Matrix LCD Touch Panels Touch Panel Program Reference 73
Power up message
Press POWER UP MESSAGE (Figure 118) to open the keyboard, and enter an ASCII
string to be sent to the AXCESS Central Controller when the Touch Panel is
powered up. The control system can be programmed to perform specific operations
when the message is received. Refer to the AXCESS Programming section for
detailed programming information.
System page
Press the SYSTEM PAGE button (Figure 119) to open the SYSTEM page
(Figure 120).
Figure 118
POWER UP MESSAGE
button
Figure 119
SYSTEM PAGE button
Figure 120
SYSTEM page
Warning
The System page should only
be used to purge unwanted
buttons, bitmaps, icons,
fonts, and stored Touch
Panel settings. Before using
this page, make sure you
have a backup copy of the
Touch Panel program stored
in the TPDesign 3 software
program. If you press YES on
any of the DELETE buttons,
the stored data is
permanently erased from the
panel memory.