AMX G3 - Manual (Page 48)

40 Designing a Touch Panel Page Color Active-Matrix LCD Touch Panels
5. Press TEXT OFF to open the keyboard shown in Figure 60.
6. Type
MAIN PAGE
. The text appears in the message box at the top of the
keyboard. If you exceed the space in the button, the Touch Panel generates an
error message. Change the size of the button or reduce the text string to clear
the error message.
7. Press EXIT CHANGE to close the keyboard and return to the TEXT/IMAGE
page.
8. Press MAKE ON SAME AS OFF to set the text for both On and Off states of the
button.
9. Press EXIT SAVE CHANGE to close the TEXT/IMAGE page and return to the
NEW page.
10. Press EXIT in the Edit bar to exit Edit Text/Image mode.
Figure 60
Keyboard
Note
The CHANGE FONT key
only appears when changing
the font of a function button
and does not apply to popup
pages.
Note
You can not create or edit
buttons with Unicode Fonts
within the Touch Panel. Any
use of the TEXT/IMAGE
button to alter or create a
Unicode Font supported
button must be done in
TPDesign 3.