Create a bargraph – AMX G3 User Manual
Page 56
48
Designing a Touch Panel Page
Color Active-Matrix LCD Touch Panels
3.
Press the FILL button in the Joystick PROPERTIES page to open the color
options again.
4.
Press white to set the fill color.
5.
Press the TEXT button to open the color options again.
6.
Press red to set the text color.
7.
Press EXIT SAVE CHANGE in the BUTTON PROPERTIES page to store the
new joystick properties in memory and return to the current page.
8.
Press EXIT in the Edit bar to exit PROPERTIES mode.
Create a Bargraph
Bargraphs (Figure 73) are level monitors or adjustable level controls that you can
configure to monitor audio outputs, lighting levels, and adjusting audio line or
light levels. Before you start, make sure to connect the Touch Panel to your AXCESS
Central Controller. Otherwise, the bargraph will not work properly. Refer to the
Touch Panel Program Reference section for detailed information.
Figure 72
Color options
Figure 73
Bargraph