AMX G3 - Manual (Page 71)

Color Active-Matrix LCD Touch Panels Touch Panel Program Reference 63
SERIAL NUMBER button shows the serial number for the Touch Panel, and the
vX.XX button shows the current firmware version installed in the Touch Panel.
Set brightness
Press SET BRIGHTNESS in the SETUP page to open the page shown in Figure 102.
Press the UP and DN buttons to set the LCD brightness on the Touch Panel. The
minimum brightness level is 1 and the maximum is 8. The TRANSPARENT and
ABORT buttons are disabled on this page.
Protected Setup
The PROTECTED SETUP button opens the PROTECTED SETUP page where you
set Touch Panel passwords, mouse controls, communications parameters, etc.
Because there are so many operations associated with PROTECTED SETUP page,
they are described in the Protected Setup subsection.
Show palette
Press SHOW PALETTE in the SETUP page to open the page. This page shows the
color selections available with the Touch Panel.
Figure 102
SET BRIGHTNESS page