AMX G3 - Manual (Page 86)

78 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
Function show
Press FUNCTION SHOW (Figure 134) to display channel code numbers and
variable text code numbers on Touch Panel buttons, joysticks, sliders, and
bargraphs. As shown in Figure 135, a channel code number appears in the upper-
left corner of the button, and a variable text number appears in the lower-right
corner.
1. Press EXIT twice to return to the MAIN page. If nothing appears in the button,
it does not have a channel code or variable text code assignment.
2. Press FUNCTION SHOW again to disable the channel code and variable text
code numbers.
LIGHT
PANEL
132 132
255 255 255
0
Button Slider
Edit button
Press EDITOR in the Protected Setup page to enable the Edit button. The Protected
Setup page remains open until you press EXIT . Then, the Edit button appears on
every page. The flowchart in Figure 136 shows the sequence to activate the Edit
button.
SETUP
MAIN
PAGE PROTECTED
SETUP
EXIT
BUTTON
EDITOR
BUTTON
TYPE
1988
EXIT
BUTTON
Figure 134
FUNCTION SHOW button
Figure 135
Function show button and
slider example
Figure 136
Edit button activation
flowchart