AMX G3 - Manual (Page 84)

76 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
• SHOW FONTS ID'S Opens the FONTS menu (Figure 127) which shows
you a listing of the available fonts.
• FACTORY RESET Opens the decision button shown in Figure 128. Press
YES to clear all Touch Panel memory or NO to cancel the operation.
Editor
Press EDITOR (Figure 129) in PROTECTED SETUP page to activate the EDIT
button. The PROTECTED SETUP page remains open until you press EXIT
When you exit the PROTECTED SETUP page, the EDIT button (Figure 130)
appears on the top or bottom of the LCD. You can press the EDIT button to open
Note
You can use the TPDesign 3
software program to import
variable fonts into the panel.
Custom fonts include Arial 12
and Bodini 18.
Figure 127
FONTS menu
Warning
You should only use the
FACTORY RESET button to
erase all stored data in the
Touch Panel. The data
cannot be recovered after it
is erased.
Figure 128
CLEAR MEMORY decision
button
Figure 129
EDITOR button