Ransburg Aerobell 168 Atex Approved 13350 - Manual (Page 16)

-0 NO CABLE - - -
-1 HIGH VOLTAGE CABLE -15’ (4.5m) A13386-15
-2 HIGH VOLTAGE CABLE -25’ (7.6m) A13386-25
-3 HIGH VOLTAGE CABLE -50’ (15.2m) A13386-50
-4 HIGH VOLTAGE CABLE -15’ (4.5m) A13348-15
-5 HIGH VOLTAGE CABLE -25’ (7.6m) A13348-25
-6 HIGH VOLTAGE CABLE -50’ (15.2m) A13348-50
Part # Dash # Description
Table H - (HIGH VOLTAGE CABLE)
CASCADE
END
APPLICATOR
END
A13348-XX
APPLICATOR
END
CASCADE
END
A13386-XX
A13352 Configuration Drawing
Other Atex Requirements
• Foot wear worn by the operator shall comply with EN ISO 20344, the measured
insulation resistance shall not exceed 100 MW.
• Protective clothing including gloves shall comply with EN 1149-5, the measured
insulation resistance shall not exceed 100 MW.
Aerobell 168 - Atex
Ransburg
LN-9247-13 13