Ransburg, Disassembly procedures – Ransburg Aerobell 168 Atex Approved 13350 User Manual
Page 77
Advertising
Step 12
Step 11
Step 10
DISASSEMBLY PROCEDURES
(For Robot/Machine Mount Kits)
Remov12 the plastic Fluid Tube
Fitting and Fluid Tube Coil from the
Valve Manifold using the Adjustable
Wrench.
To remove the Microvalve Assembly,
use the Microvalve Removal Tool
(A11922-00). Notice the small threaded
shaft protruding from the tool and the
four (4) locating pins.
Microvalve Assembly.
Microvalve Removal Tool A11922-00
Threaded Shaft
Locating Pin
Align and insert the four (4) locating pins
on the Microvalve Removal Tool into
the Microvalve Assembly four (4) holes.
Secure the Microvalve Removal Tool by
hand tightening the threaded shaft at the
knurled end of the tool.
Aerobell 168 - Maintenance
Ransburg
LN-9247-13
74
Advertising