Ransburg Aerobell 168 Atex Approved 13350 - Manual (Page 70)

DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Step 17
Step 16
Step 15
The Fluid Tip should only be
hand tighten when assembled.
Note: There is an O-ring behind
the Fluid Tip. Take care not to lose.
Using the Turbine Retaining Ring
Tool (A12088-00) remove the Tur-
bine Retaining Ring.
Note the alignment marks on
the Atomizer Body and Turbine
Retaining Ring.
Yellow Dot
Yellow Line
Aerobell 168 - Maintenance
Ransburg
LN-9247-13 67