Ransburg Aerobell 168 Atex Approved 13350 - Manual (Page 68)

DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Step 11
Step 10
Step 9
Note: Two (2) locating pins are
mounted on the back of the Shape
Air Ring to insure proper alignment.
Locate the Splash Plate that is
pressed into the Bell Cup.
Insert the narrow end of the Splash
Plate Removal Tool (A11388-00)
into the hole on the back side of the
Bell Cup. Using a hard thrust from
the palm of your hand, remove the
Splash Plate
Aerobell 168 - Maintenance
Ransburg
LN-9247-13 65