Ransburg Aerobell 168 Atex Approved 13350 - Manual (Page 72)

DISASSEMBLY PROCEDURES
(65mm Bell Cup and Shape Air Ring)
Step 23
Step 22
Step 21
Locate the Fluid Tube and Fluid
Tube Retainer.
Remove the Fluid Tube Retainer us-
ing the opposite end of the Fluid Tip/
Tube Removal Tool (A11229-00).
When re-installing, tighten to 65-
75 In.-Lbs. (7.64-8.42 N-m)
Using an Adjustable Wrench,
Note provided with Atomizer,
remove the Fiber Optic Holder.
When re-installing, tighten until unit
is seated on back surface (flash).
Aerobell 168 - Maintenance
Ransburg
LN-9247-13 69