Ransburg Aerobell 168 Atex Approved 13350 - Manual (Page 55)

DISASSEMBLY PROCEDURES
(15mm Bell Cup and Shape Air Ring)
Locate the Cup Wash Fitting that
is mounted on the Shape Air Ring.
Remove the Cup Wash Fitting from the
Shape Air Ring.
When assembling the Cup Wash Fitting,
tighten with fingers until an audible “click”
is heard.
Note: Be careful NOT to drop the Cup
Wash Ferrule.
Make sure when assembling the Cup
Wash Fitting that the ferrule taper end
is inserted into the Cup Wash Fitting.
Step 3
Step 4
Aerobell 168 - Maintenance
Ransburg
LN-9247-13 52