Ransburg, Disassembly procedures, Step 8 step 9 – Ransburg Aerobell 168 Atex Approved 13350 User Manual
Page 58: Step 10
Advertising
Step 8
Step 9
Insert the Bell Cup/ Combo Wrench
(RPM-419) across the flats located
on the Turbine. Re-move the Bell
Cup by hand
Bell Cup
When reassembling the Bell Cup
hand tighten is sufficient.
The Bell Cup should turn easily
by hand.
DISASSEMBLY PROCEDURES
(15mm Bell Cup and Shape Air Ring)
Step 10
Locate the Bell Cup Insert
(A12938-00) that is screwed
into the Bell Cup.
Note the two (2) holes located
in the Bell Cup Insert.
Aerobell 168 - Maintenance
Ransburg
LN-9247-13
55
Advertising