Ransburg, Disassembly procedures, Step 11 – Ransburg Aerobell 168 Atex Approved 13350 User Manual
Page 59: Step 12, Step 13
Advertising
Step 11
Insert the Insert Tool (12939)
into the two (2) holes in the
Bell Cup Insert located on
the back side of the Bell Cup.
Remove the Bell Cup Insert.
DISASSEMBLY PROCEDURES
(15mm Bell Cup and Shape Air Ring)
Step 12
15mm Bell Cup
Insert Tool A12939-00
Bell Cup Insert
Step 13
Use care when in-serting the Bell
Cup Insert to prevent stripping the
threads.
Note:
To continue the process of disas-
sembly procedures of the Aerobell
168 go to Step 14 on page 72
Aerobell 168 - Maintenance
Ransburg
LN-9247-13
56
Advertising