IAI America IX-NNN12040 User Manual
Page 77
Advertising
4. Maintenance inspection
71
7) Once the push stopper position acquirement for all the axes is complete, the Information
window will appear. Click “OK” button.
8) Close the Push stopper position acquisition window by clicking “u” on the upper right side
of the window. Once the window is closed, the parameters start to be written automatically
to the flash ROM, and controller is rebooted by the software reset.
9) Once the controller reboot is finished, conduct the push type absolute reset on all the axes
together.
Advertising
This manual is related to the following products: