Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 113)

Summit User Manual Chapter 6: Searching CATC Traces
Teledyne LeCroy
105
6.9 Find
Find allows you to conduct complex searches in a CATC Trace. You can search by
protocol level (Packets, Link Transactions, Split Transactions).
You can search packets by Event Group: TLP Type, TLP Header,
TLP Prefix (Summit T2-16 only), TLP Requester ID, TLP Completer ID,
TLP Data Pattern, TLP Data Lengths, TLP Tag, TLP Sequence Number, DLLP Type,
DLLP Header, DLLP Virtual Channel, ACK/NAK Seq Number, Ordered Sets, Link Event,
Direction, Errors.
You can search link transactions by Event Group: TLP Type, Traffic Class,
Virtual Channel, Direction, Requester ID, Completer ID, Status, Tag.
You can search split transactions by Event Group: TLP Type, Traffic Class,
Virtual Channel, Direction, Requester ID, Completer ID, Status, Tag.
The options Union, Intersection, and Exclusion allow you to create complex searches
such as "Find x OR y" or "Exclude all x or y."
To find a item:
Step 1 Open a CATC Trace.
Step 2 Open Find by selecting Search > Find from the menu or clicking .
Step 3 From the Search For menu, select a display level such as Packets.
To search multiple levels, finish steps 3 to 9, and then repeat 3 to 9 for
each additional display level.