Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 220)

Chapter 10: Reports and Tools Summit User Manual
212
Teledyne LeCroy
For each Exerciser device, the following information displayed:
• Number of data packets
• Payload size
• InitFC complete status: Yes/No
• Link State: Possible states are:
• DETECT_QUIET
• DETECT_ACTIVE
• POLLING_ACTIVE
• POLLING_CONFIG
• CONFIG_LINKWIDTH_START
• CONFIG_LINKWIDTH_ACCEPT
• CONFIG_LANENUM_WAIT
• CONFIG_LANENUM_ACCEPT
• CONFIG_COMPLETE
• CONFIG_IDLE
• L0
• L0S_IDLE
• L0S_FTS
• L1
• RECOVERY_RCVRLOCK
• RECOVERY_RCVRCFG
• RECOVERY_IDLE
• HOT_RESET
• DISABLED