Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 17)

Summit User Manual Chapter 2: Hardware Description
Teledyne LeCroy
9
Chapter 2: Hardware Description
The PCI Express™ system features Summit Analyzers.
2.1 System Components
• PETracer Summit system:
• PETracer Gen2 Summit™ analyzer box
• Breakout Board with cable
• PETracer Software program CD-ROM
• Active or Passive interposer (optional)
• Active or Passive interposer card with 12V power supply
• One or two (for x8 or x16 recording) Mid Box assemblies
• Two or four (for x8 or x16 recording) Analyzer-to-Pod cables
• One or two (for x8 or x16 recording) iPass Y probe data cables
• MidBus probe (optional)
• One or two (for x8 or x16 recording) PCI Express Midbus Pods with
12-volt power supplies
• One or two (for x8 or x16 recording) MidBus probe assemblies
• Two or four (for x8 or x16 recording) Analyzer-to-Pod cables
• Summit T2-16 system:
• Summit T2-16™ analyzer box
• AC Power Cable
• One or two (for x8 or x16 recording) iPass Y probe data cables
• Breakout Board with cable
• PETracer Software program CD-ROM
• Active interposer with Power Supply (optional)
• Passive interposer with Power Supply (optional)
• MidBus probe (optional)
• One or two (for x8 or x16 recording) MidBus probe assemblies
• One or two (for x8 or x16 recording) T2 MidBus Pods
2.2 Host Machine Requirements
PETracer Summit and Summit T2-16 connect to a host machine. Please consult the
readme file on the installation CD for the latest host machine requirements.