Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 164)

Chapter 9: BitTracer Recording Summit User Manual
156
Teledyne LeCroy
In Bit Tracer Recording, you can use the Snapshot, Manual Trigger, and Event Trigger
recording types.
Note: You can also use other standard Recording Options, such as Link Width,
Buffer Size, and Lane Polarity Settings, to characterize the link.
9.3 Trigger Modes
If you select Event Trigger, you may select basic trigger settings in the Trigger On box.
By default, these selections include standard K (command) characters for each direction
(upstream and downstream). You may also manually enter a D (data) character in the
upstream or downstream boxes.
To disable a K or D character in either box (and so remove a trigger condition), place the
cursor in the box and delete the displayed K or D character.