Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual User Manual
Page 25
Advertising
Summit User Manual
Chapter 2: Hardware Description
Teledyne
LeCroy
17
RS-232 25-pin Data Input/Output Connector
This connector links a 25 pin RS-232 cable to an external Breakout Board. The
Breakout Board allows signals to be sent from the Exerciser or Analyzer to an external
device such as an oscilloscope or from an external device to the Exerciser or Analyzer
for the purpose of triggering on an external input. You configure input/output through the
Recording Options dialog box. The Breakout Board use is described at the end of this
chapter.
Teledyne LeCroy Bus Connector
The Teledyne LeCroy Bus Connector is not currently active.
Advertising