Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 28)

Chapter 2: Hardware Description Summit User Manual
20
Teledyne LeCroy
2.7 External Interface Breakout Board
With each Analyzer, Teledyne LeCroy includes an External Interface Breakout Board for
accessing several potentially useful standard, LV TTL output and input signals. The
Breakout Board also offers a simple way to connect logic Analyzers or other tools to the
Analyzer unit. Six ground pins and one 5-volt pin are provided.
The Breakout Board connects via a cable to the Data In/Out connector located on the
rear of the Analyzer unit. Each signaling pin is isolated by a 100
 series resistor and a
buffer inside the Analyzer unit.
Data In/Out Connector (on cable)