Chapter 11: updates and licensing, 1 updating the analyzer, Chapter 11 updates and licensing – Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual User Manual
Page 227
Summit User Manual
Chapter 11: Updates and Licensing
Teledyne
LeCroy
219
Chapter 11: Updates and Licensing
11.1 Updating the Analyzer
BusEngine™ and/or Firmware updates are now automatic processes that run anytime a
new version of the PETracer™ software is installed that is incompatible with the currently
installed BusEngine or Firmware. The update process generates onscreen instructions.
If, however, you need to manually perform BusEngine or Firmware updates, follow these
steps:
Step 1 Select Setup > Update Device … from the menu to display the
Update Analyzer dialog box for PETracer Summit™ and
Summit T2-16™.
Step 2 Select the appropriate file locations for the Firmware and/or BusEngine,
using Browse, if necessary.
Step 3 Check the appropriate options (if in doubt, check all options).
Step 4 Click Update to initiate the updating of the Analyzer.