Teledyne LeCroy SAS Suite User Manual - Manual (Page 126)

Version 6.25 SASSuite User Manual
116
LeCroy Corporation
Counting
Events
In addition to setting triggers and filters, you can also set counters. A counter is an action
that allows you to set a trigger based on a count of events. For example, you could use
a counter to "Trigger following the 16th occurrence of an error."
To use a counter, follow these steps:
Step 1 Select an event from the Select Event menu and drag it to the Global
State Cell in the center of the dialog box.
Step 2 Click the small channel buttons on the selected Event button to select
the channels for the actions.
Step 3 Right-click the event and select Add Counter. A dialog box opens.
Step 4 In the text box to the right of the label Count enter a value.
Step 5 Make sure the checkbox to the left of the label Count is checked.
Step 6 Click the X in the top right corner of the dialog box to close the dialog. A
counter button should appear below your selected event.