Teledyne LeCroy SAS Suite User Manual - Manual (Page 151)

SASSuite User Manual Version 6.25
LeCroy Corporation
141
View Raw Bits
SASSuite allows you to view low-level 8B/10B values for Serial Attached SCSI traffic. You
can expand a specific Frame to view the raw bits by right clicking on the Frame number
and selecting Show Raw Bits.
To view Raw Bits, follow these steps:
Step 1 Click on the first cell of a Frame.
Note: Raw Bits can be viewed only in Frames.
Step 2 Select Show Raw 10b Codes.
The data 8b and 10b field can be displayed in several formats, as
shown below.
Data Appearance - To change the format of the data, select from following options:
•
8b - Click the column heading to show hexadecimal values.
•
10b - Click the column heading to show hexadecimal values.