Teledyne LeCroy SAS Suite User Manual - Manual (Page 163)

SASSuite User Manual Version 6.25
LeCroy Corporation
153
Packets to
Text (Packet
View
Format)
This option is used to create a text version of the trace (e.g., for use when emailing a trace
section). Selecting this option brings up a screen to allow you to define the range of
events that you want to include in the text file. The range can be defined by frame
number, by markers, or by time.
Define the range of events (by frames, markers or time) that you would like in the
exported file and click "OK". A screen will appear for you to provide a filename for the
exported file, and allow you to navigate to the folder where you wish to store the file. The
exported file will have a ".txt" extension.
Export to
Generator
File Format
A feature of the SASTrainer is the ability to use a trace captured by the SASTracer as the
basis for traffic to be generated by the SASTrainer. In order to use this feature, the
captured trace must first be exported by using the "Export to Generator File Format"
command. See Generating Traffic on page 204 for a discussion on how to use this
feature with the SASTrainer.
Packets to
EAS Format
This option creates EAS files based on the open trace. Selecting this option will bring up
a screen allowing you to name the files and navigate to the folder that you would like to
store the files. There are three files created, one file with a ".ecs" extension and two files
(one for each channel) with a ".eas" extention. The ".eas" files will have "_000_ch1" and
"_000_ch2" appended to the file name you provided.