Teledyne LeCroy SAS Suite User Manual - Manual (Page 154)

Version 6.25 SASSuite User Manual
144
LeCroy Corporation
Expanding a
Data
Payload
You can expand a Data Payload field to view it in greater detail or collapse it when you
want a more compact view. SASSuite allows you to expand and collapse the data
payload information in four ways:
• Clicking the small triangular arrows on the left side of the data payload
field
• Clicking and holding down the mouse button on the triangular button on
the left side of a data payload field. This action will expand or collapse
data fields for all Frames throughout the trace
• Double-clicking anywhere in the payload field
• Clicking in the data payload field and selecting Expand/Collapse Data
in the pull-down menu.
When you select "Expand Data," only the first 100 dwords are shown. To view all of the
dwords, select "View Data Block."
This section describes expanding or collapsing data payload by using the menu:
Step 1 In the Serial ATA trace, click in a Data Payload box.
Step 2 In the Data Field menu, select Expand Data.
The Data Payload box expands to show more detailed description of
the data:
To collapse data, follow the same steps described above, and select
Collapse Data.
You can also expand or collapse all data payload fields within a trace by
using the above menu.