Interrupting the upload process – Teledyne LeCroy SAS Suite User Manual User Manual
Page 29
SASSuite User Manual
Version 6.25
LeCroy Corporation
19
Interrupting
the Upload
Process
You can interrupt the upload process by pressing the Stop
button. Pressing Stop
will cause the following dialog box to open:
This dialog presents options for stopping, continuing, or aborting the recording:
•
Select New Upload Range within the Recorded Buffer
•
Slide Bar - Adjust arrows at either end of the slide bar to select the
range of buffer you want uploaded. The color in the slide bar
indicates pre- and post-trigger traffic.
•
Full Buffer - Uploads entire buffer to the PC.
•
Upload Selection - Uploads whatever range you have selected via
the slide bar.
•
Abort Upload?
•
Stop - Stops the recording and then displays the trace on screen.
•
Continue - Resumes the recording.
•
Flush - Cancels the recording without saving or displaying the trace.
Once you have interrupted an upload, a new button will appear on the toolbar:
. This
button ("Re-upload") opens a dialog box with a slide bar for re-selecting the range of the
trace that you would like to upload.