Teledyne LeCroy SAS Suite User Manual - Manual (Page 167)

SASSuite User Manual Version 6.25
LeCroy Corporation
157
Chapter 8: Searching Recordings
SASSuite has several search commands that enable you to navigate a recording in
search of key events such as errors and triggers. These commands are launched from
the Search menu.
To view the search options, click Search in the Menu bar.
Go to Trigger
To display the Trigger Event, select Go to Trigger from the Search menu. The Trace
View is repositioned with the first Frame following the Trigger event (or the Frame that
caused the Trigger) at the top of your screen.
Go to Event ...
To display a specific Frame or higher decode level, follow these steps:
Step 1 From the Search menu, select Go to Event ...
The Go to Event window appears.
Step 2 From the Go To pull-down menus,
select Frame, Time, or Markers (if
present).
If you select Frame, a menu of decode
levels will appear. Select the decode
level of interest (if it does not appear,
you may have to press a decode button
on the toolbar). Then enter an event number in the text box to the right.
If you select Time, a text box will appear prompting you to enter a time
value.
If you select Marker, a list of Markers in the trace will appear. Select a
Marker from the list.
Step 3 Click OK. The trace view is repositioned with the selected item
at the top of your screen.