Vanguard WRM-40 - Manual (Page 10)

WRM-10P AND WRM-40 USER’S MANUAL REV 3
6
1.3 WRM Controls and Indicators
The WRM-10P and WRM-40’s controls and indicators are shown in Figure 1 and Figure 2,
respectively. A leader line with an index number points to each control and indicator, which is
cross-referenced to a functional description in Table 3 for the WRM-10P and Table 4 for the
WRM-40. The tables describe the function of each item on the control panel. The purpose of
the controls and indicators may seem obvious, but users should become familiar with them
before using the WRM. Accidental misuse of the controls will usually cause no serious harm.
Users should also be familiar with the safety summary found on the front page of this User’s
Manual.
Figure 1. WRM-10P Controls and Indicators