Vanguard WRM-40 - Manual (Page 52)

WRM-10P AND WRM-40 USER’S MANUAL REV 3
48
3.9.2. Reviewing or Printing a Restored Test Record
Once you have restored a test record to the working memory (see section 3.9.1), you can print
or review it at the time it was restored or at a later time. Follow the steps below to review or
print a test record after it has been restored to the working memory:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [2] key (REVIEW RECORD).
c. The following screen will be displayed:
1. SCROLL TEST RECORD
Press the
[1]
key (SCROLL TEST RECORD) to view the test record on the LCD
screen. Use the [PAPER ∨ Contrast] key to scroll to the next page. Press the
[STOP] key when you are done viewing the test record, and you will be
returned to the “START-UP” menu.
2. PRINT TEST RECORD
Press the [2] key (PRINT TEST RECORD) to print the restored record. The test
record will be printed on the built-in thermal printer, and you will be returned to
the “START-UP” menu.
REVIEW RECORD
1. SCROLL TEST RECORD
2. PRINT TEST RECORD
1. ENTER XFMR ID
2. REVIEW RECORD
3. RESTORE RECORD
4. NEXT PAGE
1. TEST XFMR 11/02/09
2. SETUP 12:33:01
3. USER DIAG