Vanguard WRM-40 - Manual (Page 56)

WRM-10P AND WRM-40 USER’S MANUAL REV 3
52
Type the record number that you would like to erase, and then press the
[ENTER] key. The following screen will be displayed:
Press any key to return to the “START-UP” menu.
2. ERASE ALL RECORDS
Press the
[2]
key (ERASE ALL RECORDS) to erase all records stored in the WRM’s
Flash EEPROM. The following screen will be displayed:
If you would like to cancel the process, press the [STOP] key.
Press the [ENTER] key to erase all test records. The following screen will be
displayed when all the test records have been erased:
Press any key to return to the “START-UP” menu.
RECORDS ERASED!
ERASE ALL RECORDS!
Are you sure?
“ENTER” TO CONTINUE
RECORD NUMBER 1
ERASED!