Vanguard WRM-40 - Manual (Page 55)

REV 3 WRM-10P AND WRM-40 USER’S MANUAL
51
3.9.4. Erasing Test Records
Follow the steps below to erase a single test record or the entire directory of test records from
the WRM’s Flash EEPROM:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [3] key (RESTORE RECORD).
c. The following screen will be displayed:
Press the [3] key (ERASE RECORDS).
d. The following screen will be displayed:
NOTE
You can cancel the erase process by pressing the [STOP] key.
1. ERASE SINGLE REC.
Press the
[1]
key (ERASE SINGLE REC.) to erase a single record. The following
screen will be displayed:
ERASE RECORD
NUMBER:
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
1. RESTORE RECORD
2. DIRECTORY
3. ERASE RECORDS
1. ENTER XFMR ID
2. REVIEW RECORD
3. RESTORE RECORD
4. NEXT PAGE
1. TEST XFMR 11/02/09
2. SETUP 12:33:01
3. USER DIAG