Proface APL3000B - Node Box PC - Manual (Page 101)

PS-3650A / PS-3651A User Manual
5-12
5.4.3 Changing System Settings
Your Windows
®
system’s configuration settings will need to be changed when the PS-A unit is connected to a
LAN network or printer.
‹ Changing the System Configuration Settings
When the Windows
®
system configuration settings are changed, the following message appears. Enter the
name of the folder where you will save the configuration changes and click [OK].
• When Your PS-A has No Preinstalled OS
Double-click the [I386] folder in the Windows
®
CD-ROM.
D:\I386 (When the CD-ROM drive is “D”)
• When Your PS-A has a Preinstalled OS
C:\Proface\Setup\I386
5.4.4 NTFS File System Conversion
If your OS is formatted with the Windows
®
DOS-compatible file system (FAT32), it can be converted to the
NTFS file system.
To convert to the NTFS file system, start up Windows
®
and use the following command.
convert X: /fs:ntfs (Replace “X” with your drive name.)
*1 “xx” is your OS.
Example) When using Windows
®
XP: “Windows
®
XP Professional CD-ROM”
• Insert the CD labeled “Windows
®
xx*
1
Professional CD-ROM” in the CD-ROM drive
(D:), and click [OK].
• When copying the file from other locations such as a floppy disk or network server, also
click the [OK] button.
• Once the file system is converted to the NTFS file system, it cannot be converted back to the
Windows
®
DOS-compatible file system (FAT32).