Proface APL3000B - Node Box PC - Manual (Page 143)

PS-3650A / PS-3651A User Manual
7-4
(4) Remove dust on the filter using a cleaner etc. If stubborn dirt or stains are present, wash the filter with a
neutral detergent.
(5) Install the filter and tighten the screws of the fan cover.
(6) Install the fan unit in the PS-A unit.
• Do not wring the filter to dry it.
• When drying the filter, dry it without exposing it to direct sunlight.
• Dry the filter completely before reattaching it.
• Be sure the fan cover is securely attached to the PS-A unit. This is to ensure the
fan cover does not fall while the PS-A unit is operating.
• When installing the fan unit in the PS-A unit, keep the cable as left as possible seen
from the back surface of the PS-A unit, so that the fan cannot contact with it.
Filter
Filter