Proface APL3000B - Node Box PC - Manual (Page 9)

8
UL/CSA Approval
The following models are UL/CSA listed products. (UL File No. E220851, CSA File No.219866)
These models conform to the following standards:
• UL508 Industrial Control Equipment
• CSA-C22.2, No.142-M1987 Process Control Equipment
<Cautions>
Be aware of the following items when building the PS-A into an end-use product:
• The PS-A unit’s rear face is not approved as an enclosure. When building the PS-A unit into an end-use product, be
sure to use an enclosure that satisfies standards as the end-use product’s overall enclosure.
• The PS-A unit should be mounted on a flat surface of a Type 4X (Indoor Use Only) and/or Type 12 Enclosure.
• The PS-A unit must be used indoors only.
• Install and operate the PS-A with its front panel facing outwards.
• If the PS-A is mounted so as to cool itself naturally, be sure to install it in a vertical panel. Also, it’s recommended that
the PS-A should be mounted at least 50 mm [1.97 in.] away from any other adjacent structures or machine parts. The
temperature must be checked on the final product in which the PS-A is installed.
CE Marking
PS3650A-T41/PS3651A-T41 are CE marked products that conform to EMC directives and Low-voltage directive
EN55011 Class A, EN61000-6-2, and EN60950.
PS3650A-T41-24V/PS3651A-T41-24V are CE marked products that conform to EMC directives EN55011 Class A and
EN61000-6-2.
Product Model No. UL/CSA Registration Model No.
PS3650A-T41 3480801-02
PS3651A-T41 3480801-01
PS3650A-T41-24V 3480801-12
PS3651A-T41-24V 3480801-11