Proface APL3000B - Node Box PC User Manual
Page 31
PS-3650A / PS-3651A User Manual
2-8
<Magnified image>
<RI/5V change switch>
The switch can change “RI/5V” for the No.9 pin of a RS-232C. The factory setting is “RI”.
<Dip SW>
SW No.
Meaning
ON
OFF
Notes
1
Used for the system.
Reserved
Reserved
The factory setting is “OFF”.
2
3
4
Able to set up an
enabled/disabled state
for the hardware reset
switch.
*1
*1 When selected “disabled” , it is impossible to reset the system while the system is running.
However it is possible to enter the reset switch while the system is NOT running (Soft OFF
state). See the following for the Soft OFF State:
Disabled
Enabled
The factory setting is “OFF”.
5
Used for the system.
Reserved
Reserved
The factory setting is “OFF”.
6
Able to set up an
enabled/disabled state
for the front USB.
*2
*3
*2 When selected “disabled”, the front USB cannot be used after you turn on the power of the PS-A.
*3 The front USB port is available for only Windows
®
2000 and Windows
®
XP. Make sure to
disable the function of the setting when other OS used.
Enabled
Disabled
The factory setting is “ON”.
7
Able to change a Master/
Slave setting for CF card
slot.
Master
Slave
The factory setting is “OFF”.
*4
*4 When built in Pro-face’s Windows
®
XP Embedded, the factory setting is ON.
8
Used for the system.
Reserved
Reserved
The factory setting is “OFF”.
Main Memory
DipSW
RI/5V Changeover Switch
SEE