Proface APL3000B - Node Box PC - Manual (Page 122)

Chapter 6 PS-A Monitoring Features
6-21
„ List of Device Addresses
*1 When monitoring the voltage with the device monitor, the unit is “mV”.
*2 When monitoring the number of revolutions with the device monitor, the unit is “rpm”.
*3 When monitoring Temperature with the device monitor, the unit is “°C”.
*4 Used for only the system to read/write the data and perform monitoring operation.
*5 Shuts down and restarts the operation system on the client PS-A.
*6 Indicates the error event that is being monitored by the PS-A.
Device
Device
Type
Device
Symbol
Read/
Write
Bit Access
16-bit
Access
32-bit
Access
VcoreA * 1 WORD
VLT
Read
-
VLT0
-
VcoreB *
1
WORD VLT1
+3.3V *
1
WORD VLT2
+5V * 1 WORD VLT3
+12V * 1 WORD VLT4
+2.5V * 1 WORD VLT5
-12V * 1 WORD VLT6
Number of Revolution
of CPU FAN *
2
WORD FAN FAN0
System Temperature *
3
WORD
TMP
TMP0
CPU Temperature *
3
WORD TMP1
System2 Temperature WORD TMP2
DIN WORD DIN DIN00-DIN01 DIN0
DOUT WORD DOUT
Read/
Write
DOUT00-DOUT01 DOUT0
Error Event WORD ERR Read ERR00-ERR10
ERR0
ERR1
Internal Memory Area *
4
WORD LS
Read/
Write
LS00000-LS0000F
to LS02550-LS0255F
LS0000
to LS0255
LS0000
to LS0254
Shared Memory WORD PL
PL00000-PL0000F
to PL02550-PL0255F
PL0000
to PL0255
PL0000
to PL0254
Software Reset Port *
5
WORD RST - RST0 -
Error Mask *
6
WORD ERRM Read ERRM00-ERRM10
ERRM0
ERRM1
-
• When “Forced Shutdown” or “Forced Reboot” is written to the device address, the
system automatically shuts down/restarts the operation system without prompting
the confirmation for saving the data on current applications.
Take extra cautions when performing write operation in order to avoid accidental
data loss.
Value to be Written
Operation
Decimal Number Hexadecimal Number
1 0001 Shutdown
2 0002 Reboot
257 0101 Forced Shutdown
258 0102 Forced Reboot