Pci/pnp isa irq resource exclusion – Proface APL3000B - Node Box PC User Manual
Page 74
Chapter 4 System Setup
4-15
PCI/PNP ISA IRQ Resource Exclusion
Move the cursor to the [PCI/PNP ISA IRQ Resource Exclusion] on the [PCI Configuration] screen and press
the [Enter] Key, so that you can go to the ISA IRQ set-up screen.
PCI IRQ line 1 to 8
Specifies the Interrupt Request Lines (IRQ) for PCI. Select from [Disabled], [Auto Select], [3], [4], [5], [7],
[9], [10], [11], [12], [14], or [15]. The factory default setting is [Auto Select].
PCI/PNP ISA IRQ Resource Exclusion
Point the cursor to the [PCI/PNP ISA IRQ Resource Exclusion] on the [PCI Configuration] screen and press
the [Enter] Key, so that the following screen will be displayed.
IRQ 3, 4, 5, 7, 10, 11
Specifies the IRQ which is allocated to the legacy device. Select from [Available] or [Reserved]. The factory
default setting is [Available].
SEE