Proface APL3000B - Node Box PC - Manual (Page 160)

Chapter 8 Troubleshooting
8-5
8.2 Recovery Procedure
8.2.1 PS-A with no Pre-installed OS
Refer to the instruction manual for the installed OS and recover the OS.
When the OS is recovered, set up the software.
8.2.2 PS-A with Pre-installed OS (Windows
®
2000/Windows
®
XP)
Use the following steps used to recover the Windows
®
XP Multi-Language Pre-installed Hard Disk.
(1) Turn on the power of PS-A and immediately press the [F2] key to enter the BIOS setup screen. Insert the
Recovery media into the drive.
(2) Under [Boot priority order] on the [Boot] menu, use the [+] or [-] key to move [USB CDROM] to the
top.
SEE
„
Special PS-A Software Setup (page5-2)
• After performing hard disk recovery, the PS-A unit’s hard disk is returned to its
factory shipped condition.
• For recovery, a commercially-available USB keyboard is required. In addition, a
commercially available USB CD-ROM drive is also required when no DVD drive is
pre-installed in the PS-A unit.
• Do not connect the external storage unit such as USB device and CF Card while
the recovery.