Yokogawa ADMAG CA - Manual (Page 5)

IM 1E8B0-01E
1-1
1. INTRODUCTION
1. INTRODUCTION
This instrument has been already adjusted at the factory before shipment.
To ensure correct use of the instrument, please read this manual thoroughly and fully
understand how to operate the instrument before operating it.
• Regarding This Manual
* This manual should be passed on to the end user.
* Before use, read this manual thoroughly to comprehend its contents.
* The contents of this manual may be changed without prior notice.
* All rights reserved. No part of this manual may be reproduced in any form without
Yokogawa's written permission.
* Yokogawa makes no warranty of any kind with regard to this material, including, but
not limited to, implied warranties of merchantability and suitability for a particular
purpose.
* All reasonable effort has been made to ensure the accuracy of the contents of this
manual. However, if any errors are found, please inform Yokogawa.
* Yokogawa assumes no responsibilities for this product except as stated in the war-
ranty.
* If the customer or any third party is harmed by the use of this product, Yokogawa
assumes no responsibility for any such harm owing to any defects in the product
which were not predictable, or for any indirect damages.
• Safety Precautions
* The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these precau-
tions or with specific WARNINGS given elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. YOKOGAWA
Electric Corporation assumes no liability for the customer's failure to comply with
these requirements. If this instrument is used in a manner not specified in this manual,
the protection provided by this instrument may be impaired.
The following symbol marks are used in this manual and instrument;
A WARNING sign denotes a hazard. It calls attention to procedure, practice, condition
or the like, which, if not correctly performed or adhered to, could result in injury or
death of personnel.
A CAUTION sign denotes a hazard. It calls attention to procedure, practice, condition
or the like, which, if not correctly performed or adhered to, could result in damage to or
destruction of part or all of the product.
A IMPORTANT sign denotes an attention to avoid leading to damage to instrument or
system failure.
A NOTE sign denotes a information for essential understanding of the operation and
features.
Protective grounding terminal.
Function grounding terminal. This terminal should not be used as a “Protective
grounding terminal”.
Alternating current.
Direct current.