Yokogawa ADMAG CA - Manual (Page 55)

IM 1E8B0-01E
7-5
7. OPERATION VIA BRAIN TERMINAL
• Entry of codes
Codes can be entered by pressing the function key [F1] (CODE). Every time [F1] CODE
is pressed, the codes are displayed at the cursor position in the order shown below.
/ . - , + * ) ( ' & % $ # " !
To enter characters after the codes above, move the cursor using the [>] key before
entry.
Example of entry Key operation
I/m
SHIFT
K L
6
F2
SHIFT
M N
1
F1
(Lowercase
letter)
■ ■
( I ) ( / ) ( m )
(2) Function Keys
The functions of the function keys vary with the commands being displayed on the
display panel.
Command
ADJ
CAPS/caps
C LR
COPY
DATA
DEL
DIAG
ESC
FEED
HOME
LIST
NO
OK
PARM
PON/POFF
PRNT
SET
SLOT
STAT
STOP
UTIL
Description
Calls up the zero-adjustment menu.
Changes the uppercase/lowercase mode.
Clears entered data /deletes all data.
Prints parameters on the screen.
Updates parameter data.
Deletes one character.
Calls up the self-check screen.
Returns to the preceding screen.
Paper feed.
Calls up the home menu (A : DISPLAY).
Prints all parameters of the menus.
Goes to the next screen.
Parameter number setting mode.
Changes to the prints mode.
Calls up the setting menu. (B : SETTING)
Returns to the slot selection screen.
Starts print out.
Stops printing.
Transfers to the utility screen.
F1 F2 F3 F4
Function keys
Setting stop/re-setting. Returns to the previous
screen
Printer output of data whose setting was changed
Mode on/off
MENU
A:DISPLAY
B:SET
C:ADJUST
D:DISP SEL
E:TOTAL SET
F:PULSE SET
HOME SET ADJ ESC