Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) User Manual
Page 153
Brocade Virtual ADX Switch and Router Guide
139
53-1003246-01
Displaying OSPF information
6
If the software has been running less than 15 minutes (the maximum interval for utilization
statistics), the command indicates how long the software has been running. Here is an example.
To display utilization statistics for a specific number of seconds, enter a command such as the
following.
When you specify how many seconds’ worth of statistics you want to display, the software selects
the sample that most closely matches the number of seconds you specified. In this example,
statistics are requested for the previous two seconds. The closest sample available is actually for
the previous 1 second plus 80 milliseconds.
Syntax: show process cpu [num]
The num parameter specifies the number of seconds and can be from 1 – 900. If you use this
parameter, the command lists the usage statistics only for the specified number of seconds. If you
do not use this parameter, the command lists the usage statistics for the previous one-second,
one-minute, five-minute, and fifteen-minute intervals.
Virtual ADX# show process cpu
Process Name
5Sec(%)
1Min(%)
5Min(%)
15Min(%)
Runtime(ms)
ARP
0.01
0.03
0.09
0.22
9
BGP
0.04
0.06
0.08
0.14
13
GVRP
0.00
0.00
0.00
0.00
0
ICMP
0.00
0.00
0.00
0.00
0
IP
0.00
0.00
0.00
0.00
0
OSPF
0.03
0.06
0.09
0.12
11
STP
0.00
0.00
0.00
0.00
0
Virtual ADX# show process cpu
The system has only been up for 6 seconds.
Process Name
5Sec(%)
1Min(%)
5Min(%)
15Min(%)
Runtime(ms)
ARP
0.01
0.00
0.00
0.00
0
BGP
0.00
0.00
0.00
0.00
0
GVRP
0.00
0.00
0.00
0.00
0
ICMP
0.01
0.00
0.00
0.00
1
IP
0.00
0.00
0.00
0.00
0
OSPF
0.00
0.00
0.00
0.00
0
STP
0.00
0.00
0.00
0.00
0
Virtual ADX# show process cpu 2
Statistics for last 1 sec and 80 ms
Process Name
Sec(%)
Time(ms)
ARP
0.00
0
BGP
0.00
0
GVRP
0.00
0
ICMP
0.01
1
IP
0.00
0
OSPF
0.00
0
STP
0.01
0