Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) - Manual (Page 52)

38 Brocade Virtual ADX Switch and Router Guide
53-1003246-01
Configuring IP subnet VLANs
3
FIGURE 9 Subnet based (Layer 3) VLANs
To configure the VLANs shown in Figure 9 , use the following procedure.
1. To permanently assign ports 23 and port 25 to IP subnet VLAN 10.1.1.0, enter the following
commands.
Virtual ADX en
No password has been assigned yet...
Virtual ADX# config t
Virtual ADX(config)#
Virtual ADX(config)# vlan 25
Virtual ADX(config-vlan-25)# ip-subnet 10.1.1.0/24 name Green
Virtual ADX(config-ip-subnet)# no dynamic
Virtual ADX(config-ip-subnet)# static ethernet 23 ethernet 25
2. To permanently assign ports 23 and port 24 to IP subnet VLAN 10.1.2.0, enter the following
commands.
Virtual ADX(config-ip-subnet)# ip-subnet 10.1.2.0/24 name Yellow
Virtual ADX(config-ip-subnet)# no dynamic
Virtual ADX(config-ip-subnet)# static ethernet 23 ethernet 24
3. To permanently assign port 24 and port 25 to IP subnet VLAN 10.1.3.0, enter the following
commands.