Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) - Manual (Page 350)

336 Brocade Virtual ADX Switch and Router Guide
53-1003246-01
Displaying BGP4+ information
9
You also can display all the dampened routes by using the show ipv6 bgp dampened-paths
command. For more information, refer to
“Displaying dampened BGP4+ paths” on page 329.
Displaying BGP4+ neighbor information
You can display the following information about a Virtual ADX device’s BGP4+ neighbors:
Configuration information and statistics:
• Router advertisements.
• Route-attribute entries.
• Route flap dampening statistics.
• The last packet containing an error.
• Routes received from a neighbor.
• BGP4+ Routing Information Base (RIB).
• Received best, not installed best, and unreachable routes.
• Route summary.
Flaps The number of flaps (state changes) the route has experienced.
Since The amount of time (in hh:mm:ss) since the first flap of this route.
Reuse The amount of time (in hh:mm:ss) after which the path is again available.
Path The AS path of the route.
TABLE 8 Route flap dampening statistics
This field... Displays...